User's Manual

Put IC card chip side upward, push-in IC card slot and to bottom.
4）Contactless Card
Put the contactless card into the sensing area above the LCD
5）Shred paper operating Instructions
Make paper 45 degrees angle right to paper knife and shred paper.
4. Specifications
Default
CPU： 32-bit，ARM11
Memory：64MB DDR RAM, 128MB NAND Flash
Display：3.5 -inch 240x320 pixel color TFT LCD；LED backlight；Touch Screen
Keypad：10 alphanumeric keys, 5 functional keys
Magnetic Card Reader ：Track 1/2/3，bi-directional swipe
IC Card Reader：1 user card （EMV2000）
SAM slots：2 SAM slots(ISO7816)
Communication： LTE, WCDMA
Peripheral Ports: 1 MicroUSB
Printer : Thermal printer; Speed:20 lines/sec; Paper width:58mm
Paper roll outside diameter:25mm
Power Supply： Input: 100～240VAC，50Hz/60Hz，0.2A Max
Output: 5.0VDC，1A
Battery：Li-ion bttery,2600mAh,3.7V
Working Environment： Temperature：0 ℃~50℃(32℉~120℉)
R.H.: 10%~93%(non-condense)
Storage Environment： Temperature:-20℃ ~ 70℃ (-4℉~150℉)
R.H.:5% ~95%(non-condense)
Dimensions：150mm

78mm

44mm（L

W

H）
Weight：330g
Optional: WiFi、BT 、Double SIM slots
Built-in contactless card reader module（ISO/IEC 14443 Type A/B, Mifare /Felica/NFC,
card sensing area: LCD screen)
5. Installation and Usage Tips
1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
2）Forbid non-professional to repair the terminal.
3）Before insert the card, please check internal and around of IC card slot. when you found some
suspicious objects , must report to related administrator.
6. Lithium Ion Battery Usage Tips
1) Charge indoor by PAX charger, where is cool and well ventilated;
2) Do not apart the battery;
3) Do not short circuit the battery;
4) Keep the battery away from sunshine, smog and dust;
5) Do not squeeze, punch the battery, put it into liquid or near fire;
6) Keep way from environment which is too hot , too cold, damp and highly explosive;