User's Manual

2. installation
SAM/SIM/SD Card：
a) Use a coin or screwdriver to remove the battery cover (At the bottom of the terminal).
b) Insert the SAM/SIM/SD card to the corresponding card slot.
Battery replacement:
a) Use a coin or screwdriver to remove the battery cover (At the bottom of the terminal).
b) Remove the old battery: hold the battery, and pull it out.
c) Replace with a new battery: hold the battery connector and insert it into the power
socket, then align the battery in the battery compartments
3. Instructions
1）Power ON/OFF
Power on：Press the ON/OFF button two seconds until LCD backlight light, the
terminal turns on successfully.
Power off：Press the ON/OFF button two seconds until LCD no display, the terminal
turns off successfully.
2）Magnetic Stripe Card
Put magnetic stripe side of magnetic card towards device interior, swipe the card with a
steady speed during through magnetic reader slot.
(Support bi-directional swiping)
3）IC Card