User's Manual

4、Specifications
Default
CPU 32-bit, ARM9, 180MHz
Memory 8MB FLASH , 16MB SDRAM
Display 128×64 pixel LCD, LED backlight
Keypad 10 alphanumeric keys, 8 function keys,4 ATM keys and
1 switch [ON] key
Magnetic Card Reader Track 1/2/3, bi-directional swipe
IC Card Reader 1 user card (EMV2000)
SAM Slots 2, ISO7816
Communication GSM, GPRS
Peripheral Ports 1 RS232, 1 power charge port, 1 Handset port
Printer Thermal printer, Speed: 12.5 lines/sec
Paper width:58mm
Paper roll outside diameter:38mm
Battery Li-ion battery, 1800mAh, 7.4V, Over 40 hours of standby time
Power Supply Input: 100～240VAC，50Hz/60Hz，1.0A，
Output:9.5VDC，4A
Working Environment Temperature: 0℃～50℃(32℉～120℉)
R.H.: 10%～90%( non-condense)
Storage Environment Temperature:－20℃～70℃(-4℉～150℉)
R.H.:5％～95％ (non-condense)
Dimensions 199mm x 87mm x 61.5mm (L x W x H)
Weight 485g
5、Battery Usage Tips
1）Do not assemble, squeeze, punch or short the battery.
2）Do not put battery into water or near fire.
3）Do not store battery in an environment with a temperature high than 70 . Appropriate ℃
storage temperature is between -20℃～70 .℃
4）Do not use other chargers for recharge.
5）Keep the electrical contacts of battery away from other conductive material.
6）Do not use other batteries which are not manufactured by PAX
7）Do not charge battery in explosion hazardous area.
8）Do not assemble battery in explosion hazardous area.
6、Terminal Installation and Usage Tips
Note: RSS232 Port only used as upgraded EUT by manufacturer