User's Manual

2、
Installation
1）SAM Card Installation
① Open up battery cover, which is at the bottom of the terminal; ② Take out battery; ③
Insert SAM card to corresponding SAM card slot.
2）SIM/UIM Card Installation
① Open up battery cover, which is at the bottom of the terminal; ② Take out battery; ③
Insert SIM/UIM card to corresponding SIM/UIM card slot.
3）Battery Installation
① Hold the battery with its sticker facing up. ② Attach battery forelock to battery bayonet ;
③ Press down the other side of the battery.
3、Instructions
1）Power ON/FF
Power on: Press power switch button for 2 seconds until LED backlight is on, and the buzzer will
beep if POS is being turned on successfully.
Power off: Press power switch button for 2 seconds until the displaying content vanishes. POS is
being turned off.
2）Magnetic Stripe Card
When user swipes magnetic stripe card along the slot, the backside of the card, which contains
magnetic stripe information, should be facing to the terminal. Bi-directional swiping is supported.
It is recommended to swipe starting from the top of the terminal to the bottom of the terminal,
with a constant moving speed.
3）IC card
When user inserts IC card into the IC slot, the chip of IC card should be facing up; user is
recommended to gently insert the card, in order to avoid any physical damage to the card or the IC
slot of the terminal. If IC card is successfully read by the terminal, the IC card icon will be shown
on LCD display screen.
4）Tearing off receipt from the terminal
After the receipt is printed, pinch the end of the receipt and keep an angle of 45 degrees between
receipt and the cutter of the terminal; tear off the receipt swiftly.