User's Manual

Mirco SD card：Open the SIM card/SD card cover and insert the Micro SD card into the
corresponding Micro SD card slot.
LAN A/B : Open the wire hidden cover which is at the back of the terminal, insert the cable
which is connected to the Internet to LAN A or LAN B. It provides bi-directional wired
Internet for the cash register.
Cash Drawer： Open the wire hidden cover which is at the back of the terminal, insert the
RJ11 connector into the Cash Drawer interface to connect the Cash Drawer with the cash
register.
HDMI interface: Open the wire hidden cover which is at the back of the terminal, insert the
HDMI cable which connects the HD TV or display (supports 720P or above) into the HDMI
interface of the cash register. Then the HD TV or display can show all the information on the
screen of the cash register.
Audio Jack：Adopt the international standard interface, support the microphone.
3. Instruction
Power ON/OFF
Power ON: Press and hold the Power button (on the side) for three seconds until the main
screen and the guest screen display normally.
Power off: Press and hold the Power button for three seconds until the shutdown menu
appears, tap Shutdown
> Click Shutdown, and then “shutting...” appears, the terminal is being turned off.
Load the print paper: When the printer indicator lights in yellow, it needs to load the print paper.
Press the printer cover switch to open the printer cover, load the paper roll by following the
direction as shown in the paper warehouse, and close the printer cover. Then the indicator will
light off.
Magnetic stripe card： Place the magnetic stripe face to the main screen (perpendicular to the
main screen), swipe card through the magnetic card slot at a constant speed.
IC card： Place the chip face down, insert the IC card into the card slot, and push it to the end.
Swiping contactless card: Place a contactless card close to the sensor area of swiping which is
at the screen of the payment module.
4. Specification
Operation System: Android 6.0
CPU: ARM Quad-core Cortex™-A53，1.2GHZ processor
Memory: 1GB DDR3 SDRAM, 8GB eMMC
Display: 8inch, 1280*800, multi-touch capacitive touch screen, white LED backlight
Printer: 3 inch High-Speed Thermal Printer with Auto-cutter
Audio: Support speaker and microphone
Camera: 5 mega-pixel auto-focusing camera 1
2 mega-pixel fixed-focusing camera 1
L-Sensor: Support ambient light sensor