Wireless POS Terminal D210 PAX TECHNOLOGY LIMITED
1. Installation 1） SAM Card Installation ① Open up battery cover, which is at the bottom of the terminal; ② Take out battery; ③ Insert SAM card to corresponding SAM card slot. 2） Battery Installation ① Hold the battery with its facing up; ② Attach battery forelock to battery bayonet; ③ Press down the other side of the battery 2. Instruction 1） Power ON/OFF Power on: Insert power adapter or insert the battery, Press button for 3 seconds until LCD backlight is on.
Paper roll outside diameter: 40mm Power Supply：Input：100-240VAC ~0.3A 50/60HZ Output：9V DC 1A Battery：Li-on battery, 2300mAh, 7.4V Working Environment： Temperature：-10℃~50℃(32℉~122℉) R.H.: 10%~93%(non-condense) Storage Environment： Temperature:-20℃ ~ 70℃ (-4℉~158℉) R.H.:5% ~95%(non-condense) Dimensions：166.48mm 80.09mm 52.99mm（L W H） Weight：365g(with Li-on battery) 4. Installation and Usage Tips 1)Do not damage electric wire and power adapter.
protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
