User's Guide

1. Press and hold the Multifunction button for 5-seconds to switch WaveCast RX off. Your audio
system will prompt “power off”.
2. Remove the USB Type-C cable from the WaveCast RX to power the unit off.
4. PAIRING WITH TWO DEVICES
1. Pair the first device to WaveCast RX using the steps outlined above.
2. Switch off Bluetooth on the first device. This will place the WaveCast RX back into pairing mode.
3. Pair the second device to WaveCast RX using the steps outlined above.
4. Switch on Bluetooth on the first device. WaveCast RX should now be connected to two devices
concurrently.
And the 2
nd
Led will be on in Blue Color as well.
5. RECONNECTING TO A PREVIOUSLY PAIRED DEVICE
1. Whenever the WaveCast RX is powered on, it will automatically reconnect to the last paired and
connected device.
2. To pair the WaveCast RX to another device, press and hold the Multifunction Button for
approximately 3 seconds or until you hear the prompt “pairing”, then follow the instructions above.