User's Guide

Please use the diagrams above as reference for the steps below:
1. Connect the included 3.5mm auxiliary cable to the the 3.5mm port on WaveCast RX (reference 3 of
Product Overview).
2. Connect the other end of the 3.5mm auxiliary cable to the audio device’s 3.5mm AUX IN port (please
ensure that you connect to the Aux In port and not the output port marked with a headphone). Turn
on your speaker and set the input source to AUX.
3. Insert the attached power adapter to wall socket.
4. Insert the USB charging cable into the power adapter.
5. Plug the USB Type-C end of the charging cable into the WaveCast RX’s USB Type-C charging port
(reference 4 of Product Overview)
6. At this point both the auxiliary cable and USB Type-C charging cable should be plugged into the
WaveCast. This will automatically put the WaveCast RX into pairing mode.
7. Pressing and holding the Multifunction button (reference 1 in Product Overview) for 2 seconds will
also switch the device on and put it into pairing mode. To confirm that the device is in pairing mode,
you will hear two prompts: “power on” and “pairing”.
8. Navigate to Bluetooth settings on your phone or tablet, and search/scan for new devices. Once
WaveCast RX appears, select it and follow the prompts to complete the pairing process. Once
successfully paired, you were hear the prompted “connected”.
3. POWER OFF