Instructions / Assembly

ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
HARDWARE PACK
TABLE PARTS
ASSEMBLY INSTRUCTIONS
STEP 1. Set one Leg
on a at surface with
the groove near the
middle facing upward,
HOLE
HOLE
then fit the the end of
one Spreader into the
Leg groove (see FIGURE
1 ,
) Fit another Leg
onto the top of that
Spreader in the same
manner, making sure that
the holes drilled at one
end of both Legs are
facing the same direction; Legs and Spreader will now form an
"H." (FIGURE 2).
NOTE:
Chair parts are made to connect precisely, so you may find
the fit a little tight during assembly. If so, lightly tap parts into place
with a Rubber Mallet.
SUGGESTED TOOLS (NOT PROVIDED)
• Rubber Mallet
• Standard Phillips Head Screwdriver
• Drill (Square-Head Drill Bit
provided in HARDWARE PACK)
USING BARREL BOLTS
EXTREMELY
IMPORTANT:
Use ONLY
a Standard
Phillips Head
Screwdriver to
tighten Barrel
Bolt Assem-
blies; do NOT
use a drill tted
with a Phillips
head bit, as
you can strip
the Barrel Bolt
head, marring
the appear-
ance of your
Durawood
Essentials
Side Table.
then
To correctly thread Barrel Bolts to Bolt Fasteners: Fit the
Fastener over the bottom of the Bolt, turning the Fastener at
first counterclockwise, until you hear a slight click, which
means the Bolt is in its groove. Now begin tightening clock-
wise as you normally would. NOTE: Holes for bolts may seem
too big, this tolerance will not impact joint, once both barrel
bolt halves are properly secured.
Congratulations on purchasing this Durawood Essentials Side Table! You’re going to love the quality, durability and simple assem-
bly — plus the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, [phone].
Before beginning assembly, make sure you have all parts. Note
that not all parts pictured are to scale.
Durawood Essentials
Side Table
GROOVE
4 - 1" Barrel Bolts
4 - Barrel Bolt Fasteners
4 - 2" Flathead Screws
1 - Allen Wrench
1 - Square-Head Drill Bit
Hardware pack
weight: 3.4 oz
Figure 1
Figure 2