Installation Guide

Base

Paver

BROCK

For all Patios and Walkways

STEP 7

ADD 2ND LAYER OF LONG LASTING

LANDSCAPE FABRIC

Once the Brock PaverBase is installed, place a second layer of weed

barrier fabric on top of the panels to stop any sand migration. Yes

you can walk on the panels. Overlap the edges of the fabric by 4-6”.

LANDSCAPE WEED FABRIC (BARRIER)

1/2" ALL PURPOSE LEVELING PAVER SAND

STEP 8

SPREAD A LAYER OF LEVELING

SAND

Then add a 1/2” thick layer of bedding sand on top of the fabric.

This is the layer of sand that will make up any differences in

thickness that your stones may have, and allow you to get the

stones to sit level, as they may not be perfectly ﬂat on the bottom.

More sand will be needed to raise the thinner stones up to the

thicker stones.

The base is the most important step in your patio and walkway projects.

HOW TO INSTALL

PATIOS AND WALKWAYS

Natural Flagstone – (different thickness stones)