Product Manual

8. Remove key and pin from Cylinder Arm. Extend cylinder or lift arm to match 1 inch hole in Upper
Cylinder Mount with Cylinder Arm. Replace pin and key.
Paumco Fork Grapple Operating Instruction
1) Adjust tractor or skid loader forks and slide both forks into the two u channel brackets on the bottom side
of the Fork Grapple.
2) When slid to desired location tighten the two ¾ in. bolts, located on top side of the forks channels, until
claw is securely fastened.
3) Connected the two hydraulic hoses into their intended receptor on your skid loaded as stated in your loaders
owner’s manual.
4) All loose hose to be fastened with strap or bungee to prevent injury or damage.
5) Always call for utility location before digging.
6) Read all Instructions of the power unit you are using in conjunction with this Grapple.
7) Total load not to exceed power unit of medium size skid steer.