Phau Ntawv Qhia

Specification No.: 02371-001 Rev. 02/15/2022
Americas
[phone]
[e-mail]
Europe, Middle East & Africa
[phone]
[e-mail]
Asia Pacific
[e-mail]
China [phone]
Japan [phone]
Korea [phone]
India [phone]
Rest of Asia [phone]
ext 2808
Page 4
www.sensata.com
CONTACT US
Copyright © 2022 Sensata Technologies, Inc.
Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata
products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation,
and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering
practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may
make corrections, enhancements, improvements, and other changes to its data sheets or components without notice.
Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY
TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO
WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH
REGARD TO SENSATA DATA SHEETS OR USE THEREOF.
All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS
ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH
ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS
APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.
Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA
Code Name Type Comment
16912 (0x4210)
Temperature
issue
Warning event appears when temperature exceeds specifications.
4096 (0x1000)
General
malfunction
Error Global error on the device
35840 (0x8C00)
Tech Specific app
fault
Error Technology specific application fault – Reset Device
35841 (0x8C01) Simulation active Warning
Device in setup mode, the process data are not
representing encoder position. Check operational mode
35888 (0x8C30)
Process variable
range under-run
Warning
Process Data uncertain. The process data send is not
reliable. Do not use device process data!
36000 (0x8CA0) Sensor start error Error
Communication error with the sensing part.
Power Reset the device
36001 (0x8CA1)
Download from
NVM error
Error
Error while reading from permanent memory
Warning parameters load error
36002 (0x8CA2)
Upload to NVM
error
Error
Error while writing to permanent memory
Warning parameters save error
35888 (0x8C30) Test Event A Error
Event appears by setting index 252 to value 1,
Event disappears by setting index 252 to value 2
36351 (0x8DFF) Test Event B Error
Event appears by setting index 252 to value 3,
Event disappears by setting index 252 to value 4
Events
Name Index Factory Setting Comment
Encoder Output 70 1 : HTL Set the incremental output voltage
Incremental Resolution 71 1024 Set the incremental resolution
Rotation direction 72 false : CW Set the rotation direction
Z pulse width 74 0 : 90° Set the zero pulse format (see table 1)
Enter in Factory setup mode 75 0: Encoder mode Do not use
Speed calculation window 80 1 : 200ms Time between each speed data update
Absolute Position
Resolution
90 16 Resolution of the turn counter (in bits)
Operating-hours 110 0 Number of hours with device on
Factory settings parameters