SmartNode™ Branch eXchange Series SIP 3CX Based Private Branch Exchange Quick Start Guide Important—This is a Class B device and is intended for use in a light industrial or residential environment. It is not intended nor approved for use in an industrial environment. Part Number: 07MSNBX-QS, Rev. B Revised: June 25, 2014 Sales Office: +1 (301) 975-1000 Technical Support: +1 (301) 975-1007 E-mail: support@patton.com Web: www.patton.
WARNING • Do not open the device when the power cord is connected. For systems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected.
1.0 Before you begin In the box, you will find: • One SmartNode Branch eXchange (SNBX) • One External Power Supply • One RJ45 Ethernet Straight Cable (male-to-male) • One warranty sheet • One packing slip • One SmartNode Branch eXchange Quick Start Guide To install the SNBX, you will need (not included): • KVM, keyboard, and mouse or • One External PC 2.0 Connecting to the Power Source 1.
.0 Installing the SNBX via a Remote Host 1. Connect using the Microsoft Terminal Server Connection (MSTSC) (Remote Desktop Connection-RDP) to IP Address 192.168.200.10/24. 2. Connect directly to the 3CX Server as described in section 5.1 “Connecting the Ethernet management interface” on page 4. 5.0 Connecting to the Windows host 1. Connect to the Windows host through the console (KVM) (see 3.0 “Connecting the SNBX via KVM” on page 3) OR through remote means (see 4.
Note The default IP address of the SNBX is 192.168.200.10/24. 6.2 Logging on to the Web Portal In order to log on to the Web Portal/3CX Management, enter the default user ID and password: – User ID: admin – Default password: admin 7.0 Additional Information Refer to the following document for detailed information about installing, configuring, and operating the SNBX models, along with warranty, trademark, and compliance information. • 3CX Systems Manual: www.3cx.com/manual/3CXPhoneSystemManual11.
B.0 Compliance Information B.1 Compliance EMC Directive: • FCC Part 15, Class B • EN55022, Class B • EN55024 Low-Voltage Directive (Safety): • IEC/EN60950-1 2nd Edition B.
Copyright © 2013, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement The term SmartNode is a trademark of Patton Electronics Company. All other trademarks presented in this document are the property of their respective owners. Warranty For warranty information, please contact Tech Support.
NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ _______________________
