Datasheet

INFRASTRUCTURE EXTENSION PRODUCTS
COPPER ETHERNET EXTENDERS—ETHERNET BOOSTER
visit us online
www.patton.com
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!
6
Ethernet Extenders
PRODUCT GUIDE
Ethernet Booster
Model 2110
The CopperLink
™
2110 solution more than doubles Ethernet and PoE
distances over already existing network infrastructure cabling.
FEATURES & BENEFITS
4 Ethernet & PoE Extension—Doubles
10/100Base-TX Ethernet and PoE to
200 meters (656 feet). Multiple units can be
used in series for even longer extensions.
4 Operates over Cat 5—Reduces the cost and
hassles of adding switches, hubs, and wire-
less access points.
4 Plug and Play—No configuration or cable
hassles during installation with auto-sensing
10/100, full or half duplex, and
automatic MDI-X.
4 Transparent LAN Operation—Transparent
operation ensures the highest rate possible
for each extension distance.
4 No External Power Required—Power over
Ethernet (PoE) capability enables extenders
and peripheral devices to be powered over
standard twisted-pair Ethernet cable.
802.3af Power and Distance Chart
Power Delivered
Class of PoE Device
PoE Source
3rd Party
PoE switch
PoE Injector
2110/PSE/EUI-48
N/A
300 m / 984 ft
(1 x 2110/P)
Model
2110/P
2110/PSE
+ 2110/P
300 m / 984 ft
(2 x 2110/P)
400 m / 1,310 ft
(2 x 2110/P)
400 m / 1,310 ft
(3 x 2110/P)
500 m / 1,640 ft
(3 x 2110/P)
500 m / 1,640 ft
(4 x 2110/P)
600 m / 1,969 ft
(4 x 2110/P)
Maximum Distance (Quantity of Units)
13W
Class 3/0
6.5W
Class 2
3.84W
Class 1
0W
No PoE Load
ORDERING INFORMATION
2110/EUI: CopperLink 10/100 Mbps Ethernet Booster;
100–240 VAC
2110/P: CopperLink 10/100 Mbps Ethernet Booster; 802.3af
pass through
2110/PSE/EUI-48: CopperLink 10/100 Mbps Ethernet Booster and
802.3af PoE Injector; 48 VDC Source
The CopperLink™ Model 2110 doubles Ethernet
distance limitations of 328 feet (100 meters).
Multiple Model 2110 Ethernet Boosters can be
placed in-line to further extend both Ethernet
and PoE up to 1,640 ft (500 m), eliminating the
need for additional switches, hubs, wireless
access points, and expensive fiber installations.
The Model 2110 is completely transparent to
protocol making them true plug-and-play
devices, completely interoperable with any net-
work enabled device. The Model 2110 will not
cause latency or degradation on your network
connections, ensuring the maximum 100-Mbps
full-duplex line rate. The Model 2110/P and
2110/PSE not only transparently pass on
Ethernet data, but also feed on and forward PoE
power to devices such as wireless access points,
IP cameras, and VoIP phones.
Typical Applications
The CopperLInk Ethernet Booster is ideal for
delivering Ethernet to remote network enabled
devices located outside Ethernet’s limited range
of 328 feet (100 meters). Several configurations
are possible based on individual requirements.