Datasheet

visit us online
www.patton.com
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!
INFRASTRUCTURE EXTENSION
COPPER T1/E1 ETHERNET EXTENDERS
13
Ethernet Extenders
PRODUCT GUIDE
T1 Extender
CopperLink
™
-T 2115
The CopperLink™-T 2115 is a transparent, plug-and-play T1 Extender
that solves the distance and wire limitations of TDM technology
by tripling the reach to over 3 miles over a single pair of wires.
FEATURES & BENEFITS
4 Voice and Data Extension—The T1/E1
Extenders operate in clear channel mode
allowing the transparent passing of both
voice and data.
4 Plug and Play—Plug them in and the link
comes up in seconds. The line interface is
even polarity insensitive, making it easier to
get running.
4 Line Tests—V.52 511/511E Pattern
Generator with Remote Digital Loopback
(RDL); Local Analog Loopback (LAL).
Large PBX
Up to 18,500 ft/5,600 m
(T1) over voice-grade
twisted-pair
Model
2115
Model
2115
Main Office
Branch Office
PBX
E1 Extender
CopperLink
™
2113A
The CopperLink™ 2113A is a transparent, plug-and-play E1
Extender that solves the distance and wire limitations of TDM tech-
nology by tripling the reach and halving the number of required
wire pairs.
With the CopperLink™ 2113A extender, zero configuration is required. They operate in clear-channel
mode, thereby facilitating the transparent extension of data and voice bearing circuits. The two active
pins on the RJ connector are polarity insensitive, so you don’t even need to worry about which wire
you connect on the line interface. Simply take them out of the box, put them on either side of the dry
copper pair, connect your E1 device and the circuit will light up immediately!
The Model 2113A extends E1 circuits to 16,100 feet (4,900 meters, nearly 5 km). The 2113A requires
only two wires (one pair) to extend the TDM circuits, thereby conserving and minimizing the copper
plant resources used.
FEATURES & BENEFITS
4 Triple the Distance—Extend E1s to nearly
5 km over one pair of wires.
4 Half the Wires—The E1 extender only needs
one pair of wires to operate.
4 Voice and Data Extension—The E1
Extender operates in clear channel mode
allowing the transparent passing of voice
and data.
4 Plug and Play—Plug the 2113A in and the
link comes up in seconds. The line interface
is even polarity insensitive, making it easier
to get running.
4 Line Tests—V.52 511/511E Pattern
Generator with Remote Digital Loopback
(RDL); Local Analog Loopback (LAL).
4 Front Panel Status Indicators—Front panel
LEDs provide users with quick feedback on
unit operation.
Cell tower
facility
Up to 16,100 ft/4,900 m
(E1) over voice-grade
twisted-pair
Model
2113A
Model
2113A
Main Office
CopperLink
™
-T T1/E1 Ethernet Extenders
Distance at 24 AWG
Model
2.8 miles (4.6 km)
CopperLink
™
-T 2115
2.5 miles (4.0 km)
CopperLink
™
-T 2113A
Signaling Standard
T1
E1
ORDERING INFORMATION
2115/EUI-2PK: CopperLink T1 Extender Kit; 100–240 VAC
2113A/EUI-2PK: CopperLink E1 Extender Kit; 100–240 VAC