- Patton Leased-Line Extenders over IP Getting Started Guide

Status LEDs 37
Model 2292 & 2294 Series Getting Started Guide 5 • LEDs status and monitoring
Status LEDs
This chapter describes SmartNode VoIP extender front panel LEDs. Figure 16 shows SmartNode 2292 and
2294 Series LEDs. LED definitions are listed in table 8 on page 37.
Figure 16. Examples of SmartNode 2292 and 2294 Series front panels
Table 8. SmartNode LED Indications
LED Description
Note If an error occurs, all LEDs will flash once per second.
Power When lit, indicates power is applied. Off indicates no power applied.
Run When lit, indicates normal operation. Flashes once per second during boot (startup).
VoIP Link When lit, indicates the gateway is registered on a gatekeeper, media gateway con-
troller, associated to a remote unit, or has an active VoIP connection. Off indicates the
unit is not configured or registered and has no active VoIP connection. Flashing green
indicates that the unit is attempting or has failed to associate/register
Voice port Solid when leased line channel is operational. Should not be off or blinking.
Ethernet (each port) • Link: Lit when Ethernet link is up.
• 100M: On when 100-Mbps Ethernet is selected.
• Activity: Flashes when data is received or transmitted from the unit to the LAN.
Console
port
Power VoIP Link
Enet 0
Link
Run
Enet 0
Activity
Enet 0
100M
Enet 1
Link
Enet 1
100M
Enet 1
Activity
Voice
Port 0/0
Voice
Port 0/1
Voice
Port 0/2
Voice
Port 0/3
Link 100M Activity 0/0 0/1 0/2 0/3 Power
Console
Leased-Line Extender Over IP
SmartNode 2294
Run VoIP Link Link 100M Activity
L
i
n
k
1
0
0
M
A
c
t
i
v
i
t
y
0
/
0
0
/
1
0
/
2
0
/
3
Enet 0 Ports
P
o
w
e
r
Console
Leased-Line Extender Over IP
SmartNode 2294
R
u
n
V
o
I
P
L
i
n
k
L
in
k
1
0
0
M
A
c
t
i
v
i
t
y
Enet 1