- Patton Leased-Line Extenders over IP Getting Started Guide

About this guide

This guide describes the SmartNode 2294 and 2292 Series hardware, installation and basic conﬁguration. For

detailed software conﬁguration information refer to the

SmartWare Software Conﬁguration Guide

and the avail-

able Conﬁguration Notes.

Audience

This guide is intended for the following users:

• Operators

• Installers

• Maintenance technicians

Structure

This guide contains the following chapters and appendices:

• Chapter 1 on page 14 provides information about extender features and capabilities

• Chapter 2 on page 19 contains an overview describing extender operation and applications

• Chapter 3 on page 21 provides quick start hardware installation procedures

• Chapter 4 on page 32 describes getting started with the SmartNode extender

• Chapter 5 on page 36 contains deﬁnitions for the LED status indicators

• Chapter 6 on page 38 contains information on contacting Patton technical support for assistance

• Appendix B on page 43 contains speciﬁcations for the extenders

• Appendix C on page 46 provides cable recommendations

• Appendix D on page 50 describes the extender’s ports and pin-outs

• Appendix E on page 57 lists the factory conﬁguration settings for SmartNode 2294 Series devices

• Appendix F on page 59 lists the factory conﬁguration settings for SmartNode 2292 Series devices

• Appendix E on page 52 lists the tasks for installing a SmartNode 2292 or 2294 Series extender

For best results, read the contents of this guide

before

you install the extender.