User's Manual

• dsl help: Lists all the commands that start with dsl that the

console recognizes.

• dsl set help: Lists all the commands that start with dsl set that the

console recognizes.

• dsl show help: Lists all the commands that start with dsl show that

the console recognizes.

• dsl show errcntr help: Lists all the commands that start with dsl

show errcntr that the console recognizes.

System ConÞguration Commands

The following commands allow the user to conÞgure the system:

• system set password <password>: Sets the system password.

• system set circuitid <circuitid>: Sets the circuit ID.

• system set clockmode <internal|external|receiverecover>: Sets

the clock mode. Internal clock mode means the 3088RC provides the

clock to both the DSL and the serial interface. External clock mode

means the 3088RC uses the serial transmit clock as its DSL transmit

clock. Receive recover clock mode means that the 3088RC uses the

DSL receive clock as its DSL transmit clock and as the serial receive

clock.

Note X.21 External Clock Mode—The X.21 interface expects the

DCE to provide the clock used for both transmitting data and for

sampling receive data. When the 3088RC/D/V is set as a DCE,

it may be used in internal or receive recover clock modes. The

DSL generates a clock that is provided to the X.21 interface.

When the 3088RC/D/V is a DTE, it may be used in external

clock mode. The X.21 interface needs to provide the clock. This

clock is used by the DSL to sample the serial data and also to

update the receive data.

The 3088RC is set for either DCE or DTE by ßipping the daugh-

ter-card. The 3088RC is a DCE if DCE points toward the front of

the 3088RC.

• system set dteif <normal|e1>: Set to E1 if the rear card is Model

3088RC/K/K. Set to normal for all other models.

The following commands allow the user to view the current

system conÞguration: