- Patton Electronics 2Base-TL Ethernet First Mile G.SHDSL Modem Getting Started Guide

Introduction 68
Model 3202 Getting Started Guide 5 • Console and Telnet configuration
The Model 3202 uses a menu-driven interface for serial console and Telnet management. This interface dis-
plays all available commands for configuring the modem.
The following figure shows an example of the menu-driven interface. In the menu, scroll up/down by pressing
the I / K keys. Select one command by pressing the L key. Go back to a higher level of the menu by pressing
the J key. You can also scroll to the top/bottom with the U/O keys.
For example, to show the system information, log on to the Model 3202. Press the K key twice and select the
show command with the L key. Select the system command in the submenu. The system will display general
information. You may also use the Enter key to select a command.
Figure 46. Console/Telnet Menu
Window structure
From top to bottom, the window is divided into four parts:
• Product name: G.SHDSL EFM Bridge
• Menu field: The menu tree prompts on this field. Symbol “>>” indicates the cursor place.
• Configuration field: Configure the parameters in this field. < parameter > indicates the parameters you can
choose and < more…> indicates that there are more options in the submenu.
• Footer: Operation commands for help