- Patton Electronics ADSL2/2+ Triple-Play Access IPDSLAM Module Getting Started Guide

Hardware Installation 18
Model 3101RC Getting Started Guide 2 • Hardware Installation
Ethernet Port (10/100 ENET) on Trunk Card
The Model 3101RC provides one RJ45 Jack (10/100 ENET) on the front panel of 3101RC card for Ethernet
interface connection. The detailed pin assignment is shown in figure 5:
Figure 5. Ethernet Port RJ-45 pin assignment
To connect the Ethernet interface to PC, the Ethernet crossover cable is required. The detailed pin assignment
is shown below:
Figure 6. Ethernet crossover cable
PIN 1 PIN 8
LED B
LED A
1 2 3 6 Other pins
TX + TX - RX + RX -