User Guide
firewall set validator 51
Model 3231 CLI Reference Guide 5 • Firewall Commands
firewall set validator
Configure the settings for a validator.
Note Begin each top-level command in the table below with
firewall set validator <name> <policyname>.
Table 33. firewall set validator
Command Explanation
disabled Disable a validator that has been added to a policy. This allows it
to be temporarily disabled without forcing the user to delete and
then recreate it. This could be useful in a testing scenario.
enabled Enable a validator that has been added to a policy.
interface <interface-name> This validator will use the IP address of an existing IP interface.
ipaddress <ipaddress> Set the validator IP address.
netmask <hostipmask> Set the validator netmask.