User Guide

pppoe add transport 124
Model 3231 CLI Reference Guide 13 • PPPoE Commands
pppoe add transport
Add a PPP over Ethernet (PPPoE) transport.
Note Begin each top-level command in the table below with
pppoe add transport <name> dialout.
Table 90. pppoe add transport
Command Explanation
eth <ifc><port> Create a PPPoE trans-
port that performs dia-
lout over Ethernet.
accessconcentrator
<concentrator>
Connect only to the
named access concen-
trator or to the first
access concentrator that
responds.
servicename <servicename> Connect to the specified
service on the named
concentrator.
servicename <servicename> Connect to the first
access concentrator that
uses this service.
pvc <ifc> <port> <vpi><vci> Create a PPPoE trans-
port that performs dia-
lout over a PVC
(Permanent Virtual Cir-
cuit).
accessconcentrator
<concentrator>
Connect only to the
named access concen-
trator or to the first
access concentrator that
responds.
servicename
<servicename>
Connect to the specified
service on the named
concentrator.
servicename <servicename> Connect to the first
access concentrator that
uses this service.