- Patton Electronics Network Hardware User Manual

Configuring Multiple Cards 42
FS6300 NMS User Manual 2 • Discovering Your Network
Configuring Multiple Cards
If you have separate subnets that are supposed to be in the same Geographical Area but in a specifically named
Node and Chassis, you will want to update the subnet information so that is displayed as it actually is located
in the network.
Updating the Configuration
To configure multiple cards:
1. Select Tools from the menu at the top of the screen, then Multiple Card Configuration.
The Multiple Card Configuration window appears.
Figure 27. Tools > Multiple Card Configuration
2. Click on Card Parameters in the menu tree on the left side of the screen.
Figure 28. Multiple Card Configuration > Card Parameters