- Patton Electronics Network Hardware User Manual

Viewing the Front Panel 107
FS6300 NMS User Manual 7 • Configuring the 3196RC Card
• Ethernet Overview – See “Configuring Ethernet Settings” on page 109
• Events and Alerts – See “Viewing Events and Alerts” on page 62
• iDSL Port Configuration – See “Configuring iDSL Ports” on page 110
• iDSL Report – See “Viewing iDSL Reports” on page 113
• IP Routing – See “Configuring IP Routing” on page 114
• Operator Action – See “Managing Operator Actions” on page 60
• PPP Configuration – See “Configuring PPP” on page 116
• System Log – See “Viewing/Modifying System Log Configuration” on page 65
• T1E1 Port Configuration – See “Configuring the T1/E1 Ports” on page 120
• T1E1 Reports – See “Viewing T1/E1 Reports” on page 124
• Re-Discover Card – See “Re-Discovering Cards Manually” on page 38
• Ping – Displays a status message after pinging the interface.
Viewing the Front Panel
Click on Card Front Panel GUI to view the front panel of the card in real-time.
Figure 92. 3196RC Front Panel LEDs
Configuring the Card System
Click on Card System Configuration to configure system parameters. You can also view the system status, eth-
ernet status, system parameters, SNMP and HTTP Parameters, and system status details.
Modify System Parameters
If you only want to view the system parameters, click on View System Parameters in the Card System Config-
uration window.
To configure the card system, click on Modify System Parameters in the menu tree in the Card System Con-
figuration window (see Figure 93 on page 108).