USER MANUAL MODEL 2025 Parallel to Serial/ Serial to Parallel Interface Converter Part # 07M2025-B Doc. #102041UB Revised 6/2/97 CERTIFIED An ISO-9001 Certified Company SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.
1.0 WARRANTY INFORMATION 1.3 SERVICE Patton Electronics warrants all Model 2025 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above.
2.0 GENERAL INFORMATION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of the unit, contact Patton Electronics Technical Support: (301) 975-1007; http://www.patton.com; or, support@patton.com. 2.
Switch 3 through 5: Data, Parity and Stop Bit DIP SWITCH SUMMARY TABLE Position Function Factory Default SW1 Flow Control Off Hardware SW2 LED Indicator On Enabled SW3 Data, Parity, Stop Bits Off SW4 Data, Parity, Stop Bits Off SW5 Data, Parity, Stop Bits Off SW6 Data Rate Off SW7 Data Rate Off SW8 Data Rate Off } } 8B, NP, 1S 9600 bps Switches 3 through 5 are used to specify the data, parity and stop bits.
.0 OPERATION 4.0 INSTALLATION The Patton Model 2025 is very simple to install. Once you have configured the DIP switches, just plug it in like a normal cable and you're ready to go. Figure 3 illustrates the proper connections for the standard cables. If you have special-ordered a non-standard connector, your connections may be different. Once your interface converter is properly configured and installed, it should operate transparently—as if it were a standard cable connection.
APPENDIX B PATTON MODEL 2025 INTERFACE CONNECTIONS APPENDIX A PATTON MODEL 2025 SPECIFICATIONS 36 PIN CENTRONICS PARALLEL PORT CONNECTIONS Pin Interface: Asynchronous.
APPENDIX C PATTON MODEL 2025 BLOCK DIAGRAM Dear Valued Customer, Thank you for purchasing Patton Electronics products! We do appreciate your business. I trust that you find this user manual helpful.
