Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 13 SDS No. : 409477 V001.5 Revision: 28.05.2015 printing date: 03.11.2015 Replaces version from: 27.03.2014 Pattex Special Plastic SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Pattex Special Plastic Contains: Acetone n-Butyl acetate 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Contact adhesive 1.3.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 2 of 13 Hazard pictogram: Signal word: Danger Hazard statement: H225 Highly flammable liquid and vapor. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. Supplemental information EUH066 Repeated exposure may cause skin dryness or cracking. Precautionary statement: P102 Keep out of reach of children. P101 If medical advice is needed, have product container or label at hand.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 3 of 13 SECTION 4: First aid measures 4.1. Description of first aid measures General information: In case of adverse health effects seek medical advice. Inhalation: Move to fresh air, consult doctor if complaint persists. Skin contact: Rinse with running water and soap. Skin care. Remove contaminated clothes immediately. Eye contact: Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 4 of 13 6.4. Reference to other sections See advice in section 8 SECTION 7: Handling and storage 7.1. Precautions for safe handling Ventilate working rooms thoroughly. Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do not smoke, do not weld. Do not empty waste into waste water drains. Also to be noted when processing larger amounts (> 1 kg): during processing and drying after adhesion, ventilate well.
MSDS-No.: 409477 V001.
MSDS-No.: 409477 V001.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 7 of 13 Hand protection: Recommended are gloves made from Nitril rubber ( Material thickness >0,1 mm, Perforation time < 30s).Gloves should be replaced after each short time contact or contamination. Available at laboratory specialized trade or at pharmacies / chemist's shops. In the case of longer contact protective gloves made from butyl rubber are recommended according to EN 374.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 8 of 13 10.2. Chemical stability Stable under recommended storage conditions. 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid None if used for intended purpose. 10.5. Incompatible materials None if used properly. 10.6. Hazardous decomposition products None known. SECTION 11: Toxicological information 11.1.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 9 of 13 Serious eye damage/irritation: Hazardous components CAS-No. Acetone 67-64-1 n-Butyl acetate 123-86-4 Result Exposure time Species Method irritating rabbit not irritating rabbit OECD Guideline 405 (Acute Eye Irritation / Corrosion) BASF Test Species Method Respiratory or skin sensitization: Hazardous components CAS-No.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 10 of 13 12.1. Toxicity Hazardous components CAS-No. Value type Value Exposure time Species Method 8.120 mg/l Acute Toxicity Study Fish Acetone 67-64-1 LC50 96 h Pimephales promelas EC50 6.098,4 mg/l Daphnia 48 h Daphnia magna LC50 62 mg/l Fish 96 h Leuciscus idus OECD Guideline 203 (Fish, Acute Toxicity Test) OECD Guideline 202 (Daphnia sp.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Product disposal: Dispose of waste and residues in accordance with local authority requirements. Disposal of uncleaned packages: Use packages for recycling only when totally empty. Waste code 08 04 09 waste adhesives and sealants containing organic solvents and other dangerous substances SECTION 14: Transport information 14.1. UN number ADR RID ADN IMDG IATA 14.2. UN proper shipping name ADR RID ADN IMDG IATA 14.3.
MSDS-No.: 409477 V001.5 Pattex Special Plastic Page 12 of 13 SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture VOC content 83,4 % (VOCV 814.018 VOC regulation CH) 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. National regulations/information (Germany): WGK: Storage class according to TRGS 510: 1, slightly water-endangering product.
MSDS-No.: 409477 V001.