Safety Data Sheet according to Regulation (EC) No 1907/2006 Page 1 of 15 SDS No. : 488042 V002.0 Revision: 20.01.2020 printing date: 22.01.2020 Replaces version from: 26.09.2017 Pattex Montage Power SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Pattex Montage Power 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Assembly adhesives 1.3.
SDS No.: 488042 V002.0 Pattex Montage Power Page 2 of 15 2.3. Other hazards None if used properly. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. SECTION 3: Composition/information on ingredients 3.2. Mixtures General chemical description: 1-Component assembly adhesive Base substances of preparation: Styrene-acrylate copolymer Declaration of the ingredients according to CLP (EC) No 1272/2008: Hazardous components CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Eye contact: Rinse immediately with plenty of running water, seek medical advice if necessary. Ingestion: Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice. 4.2. Most important symptoms and effects, both acute and delayed No data available. 4.3. Indication of any immediate medical attention and special treatment needed See section: Description of first aid measures SECTION 5: Firefighting measures 5.1.
SDS No.: 488042 V002.0 Pattex Montage Power Page 4 of 15 7.3. Specific end use(s) Assembly adhesives SECTION 8: Exposure controls/personal protection 8.1.
SDS No.: 488042 V002.
SDS No.: 488042 V002.0 Pattex Montage Power Page 6 of 15 Derived No-Effect Level (DNEL): Name on list Application Area Workers Route of Exposure inhalation 1,2-Benzisothiazol-3(2H)-one 2634-33-5 Workers dermal 1,2-Benzisothiazol-3(2H)-one 2634-33-5 General population inhalation 1,2-Benzisothiazol-3(2H)-one 2634-33-5 General population dermal Mixture, 3(2H)-Isothiazolone, 5-chloro-2methyl-, mixt. with 2-methyl-3(2H)isothiazolone 55965-84-9 Mixture, 3(2H)-Isothiazolone, 5-chloro-2methyl-, mixt.
SDS No.: 488042 V002.0 Pattex Montage Power (20 °C (68 °F)) Melting point Solidification temperature Initial boiling point Flash point Evaporation rate Flammability Explosive limits Vapour pressure Relative vapour density: Density (20 °C (68 °F)) Bulk density Solubility Solubility (qualitative) (23 °C (73.
SDS No.: 488042 V002.0 Pattex Montage Power Page 8 of 15 SECTION 11: Toxicological information General toxicological information: An allergic reaction cannot be excluded after repeated skin contact. 11.1. Information on toxicological effects Acute oral toxicity: The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances Value CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Page 9 of 15 Serious eye damage/irritation: The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Page 10 of 15 Germ cell mutagenicity: The mixture is classified based on threshold limits referring to the classified substances present in the mixture. Hazardous substances CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Page 11 of 15 Reproductive toxicity: The mixture is classified based on threshold limits referring to the classified substances present in the mixture. Hazardous substances Result / Value CAS-No. 1,2-Benzisothiazol-3(2H)- NOAEL P 112 mg/kg one 2634-33-5 NOAEL F1 56,6 mg/kg Test type Two generation study Route of application oral: feed Species Method rat EPA OPPTS 870.
SDS No.: 488042 V002.0 Pattex Montage Power Page 12 of 15 SECTION 12: Ecological information General ecological information: Do not empty into drains / surface water / ground water. 12.1. Toxicity Toxicity (Fish): The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Page 13 of 15 The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Hazardous substances CAS-No. 1,2-Benzisothiazol-3(2H)-one 2634-33-5 Isothiazolinone mixture 3:1 (CIT/MIT) 55965-84-9 Page 14 of 15 LogPow Temperature Method 0,7 20 °C EU Method A.8 (Partition Coefficient) -0,71 - 0,75 20 °C OECD Guideline 117 (Partition Coefficient (n-octanol / water), HPLC Method) 12.5. Results of PBT and vPvB assessment PBT / vPvB Hazardous substances CAS-No.
SDS No.: 488042 V002.0 Pattex Montage Power Page 15 of 15 SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture VOC content 0,0 % (VOCV 814.018 VOC regulation CH) 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. SECTION 16: Other information The labelling of the product is indicated in Section 2.
