Certifications 2

ManualsBrandsPATTEX ManualsAdhesivesAll Materials Industrial glue Colour White 450 g

Safety Data Sheet according to Regulation (EC) No 1907/2006

Page 1 of 11

Pattex Montage All Material

SDS No. : 459266

V003.0

Revision: 19.02.2019

printing date: 25.10.2019

Replaces version from: 07.06.2018

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Pattex Montage All Material

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Assembly adhesives

1.3. Details of the supplier of the safety data sheet

Henkel Ltd

Wood Lane End

HP2 4RQ

Hemel Hempstead

Great Britain

Phone:

+44 (1442) 278000

Fax-no.:

+44 (1442) 278071

ua-productsafety.uk@henkel.com

1.4. Emergency telephone number

24 Hours Emergency Tel: +44 0 8701 906777 - For further general health & safety, technical and practical advice on this

product, please call +44 (0) 1606 593933 or write to: Technical Services; Henkel Limited; Road 5; Winsford Industrial Estate;

Winsford; Cheshire; CW7 3QY- Email: technical.services@henkel.co.uk

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.2. Label elements

Label elements (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

Precautionary statement:

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P271 Use only outdoors or in a well-ventilated area.

2.3. Other hazards

Evolves methanol during cure.

Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria.

Summary of content (11 pages)

PAGE 1
Safety Data Sheet according to Regulation (EC) No 1907/2006 Page 1 of 11 SDS No. : 459266 V003.0 Revision: 19.02.2019 printing date: 25.10.2019 Replaces version from: 07.06.2018 Pattex Montage All Material SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Pattex Montage All Material 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Assembly adhesives 1.3.
PAGE 2
SDS No.: 459266 V003.0 Pattex Montage All Material Page 2 of 11 SECTION 3: Composition/information on ingredients 3.2. Mixtures General chemical description: Adhesive Base substances of preparation: Silane-modified polyether Mineral fillers Declaration of the ingredients according to CLP (EC) No 1272/2008: Hazardous components CAS-No. Trimethoxyvinylsilane 2768-02-7 EC Number REACH-Reg No. 220-449-8 01-2119513215-52 content Classification 1- < 5 % Flam. Liq. 3 H226 Acute Tox.
PAGE 3
SDS No.: 459266 V003.0 Pattex Montage All Material 5.3. Advice for firefighters Wear protective equipment. Wear self-contained breathing apparatus. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Wear protective equipment. Ensure adequate ventilation. Avoid contact with skin and eyes. 6.2. Environmental precautions Do not empty into drains / surface water / ground water. 6.3.
PAGE 4
SDS No.: 459266 V003.0 Pattex Montage All Material Page 4 of 11 SECTION 8: Exposure controls/personal protection 8.1.
PAGE 5
SDS No.: 459266 V003.
PAGE 6
SDS No.: 459266 V003.0 Pattex Montage All Material SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance paste pasty beige Odor alcohol-like Odour threshold No data available / Not applicable pH Melting point Solidification temperature Initial boiling point Flash point Evaporation rate Flammability Explosive limits Vapour pressure Relative vapour density: Density (20 °C (68 °F)) Bulk density Solubility Solubility (qualitative) (23 °C (73.
PAGE 7
SDS No.: 459266 V003.0 Pattex Montage All Material Page 7 of 11 SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute oral toxicity: The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No. Trimethoxyvinylsilane 2768-02-7 Value type LD50 Value 7.
PAGE 8
SDS No.: 459266 V003.0 Pattex Montage All Material Page 8 of 11 Germ cell mutagenicity: The mixture is classified based on threshold limits referring to the classified substances present in the mixture. Hazardous substances CAS-No. Result Trimethoxyvinylsilane 2768-02-7 negative Trimethoxyvinylsilane 2768-02-7 positive Trimethoxyvinylsilane 2768-02-7 negative Trimethoxyvinylsilane 2768-02-7 negative Type of study / Route of administration bacterial reverse mutation assay (e.
PAGE 9
SDS No.: 459266 V003.0 Pattex Montage All Material Page 9 of 11 SECTION 12: Ecological information General ecological information: Do not empty into drains, soil or bodies of water. 12.1. Toxicity Toxicity (Fish): The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No.
PAGE 10
SDS No.: 459266 V003.0 Pattex Montage All Material Page 10 of 11 12.4. Mobility in soil No data available. 12.5. Results of PBT and vPvB assessment PBT / vPvB Hazardous substances CAS-No. Trimethoxyvinylsilane 2768-02-7 According to Annex XIII of regulation (EC) 1907/2006 a PBT and vPvB assessment shall not be conducted for inorganic substances. 12.6. Other adverse effects No data available. SECTION 13: Disposal considerations 13.1.
PAGE 11
SDS No.: 459266 V003.0 Pattex Montage All Material Page 11 of 11 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H226 Flammable liquid and vapor. H332 Harmful if inhaled. H373 May cause damage to organs through prolonged or repeated exposure.