Certifications 2

SDS No.: 43189 V004.0
Pattex Powerkleber Stabilit Express, Härter
Page 4 of 13
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
Can form explosive gas/air mixtures.
5.3. Advice for firefighters
Wear protective equipment.
Wear self-contained breathing apparatus.
Additional information:
Cool endangered containers with water spray jet.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective equipment.
Danger of slipping on spilled product.
Avoid contact with skin and eyes.
Ensure adequate ventilation.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove with liquid-absorbing material (sand, peat, sawdust).
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Ensure that workrooms are adequately ventilated.
Take measures to prevent the build-up of electrostatic charges.
Avoid naked flames, sparking and sources of ignition.
Avoid skin and eye contact.
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
7.2. Conditions for safe storage, including any incompatibilities
Keep only in original container.
Keep container in a well ventilated place.
Store protected from heat influence.
Temperatures between 0 °C and + 30 °C
Store in a cool place, max. storage temperature 30°C.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
2-Component methyl methacrylate adhesive