Safety data sheet

ManualsBrandsPATTEX ManualsAdhesivesUNIVERSAL Silicone Colour Transparent 300 ml

Safety Data Sheet according to (EC) No 1907/2006

Page 1 of 8

Pattex Universal Silicone, all colours

SDS No. : 462404

V001.3

Revision: 28.05.2015

printing date: 15.01.2016

Replaces version from: 30.08.2013

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Pattex Universal Silicone, all colours

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Joint sealant, polymer silan-modified

1.3. Details of the supplier of the safety data sheet

Henkel Ltd

Wood Lane End

HP2 4RQ

Hemel Hempstead

Great Britain

Phone:

+44 (1442) 278000

Fax-no.:

+44 (1442) 278071

ua-productsafety.uk@uk.henkel.com

1.4. Emergency telephone number

24 Hours Emergency Tel: +44 0 8701 906777 - For further general health & safety, technical and practical advice on this

product, please call +44 (0) 1606 593933 or write to: Technical Services; Henkel Limited; Road 5; Winsford Industrial Estate;

Winsford; Cheshire; CW7 3QY- Email: technical.services@henkel.co.uk

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.2. Label elements

Label elements (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

Precautionary statement:

P102 Keep out of reach of children.

P101 If medical advice is needed, have product container or label at hand.

P262 Do not get in eyes, on skin, or on clothing.

P271 Use only outdoors or in a well-ventilated area.

Summary of content (8 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 8 SDS No. : 462404 V001.3 Pattex Universal Silicone, all colours Revision: 28.05.2015 printing date: 15.01.2016 Replaces version from: 30.08.2013 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Pattex Universal Silicone, all colours 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Joint sealant, polymer silan-modified 1.3.
PAGE 2
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours Page 2 of 8 2.3. Other hazards Evolves acetic acid during cure. SECTION 3: Composition/information on ingredients 3.2. Mixtures General chemical description: 1-Component silicone joint sealant, acetate-curing (acidic) Base substances of preparation: Polydimethyl siloxane Inorganic fillers Declaration of the ingredients according to CLP (EC) No 1272/2008: Hazardous components CAS-No.
PAGE 3
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media: carbon dioxide, foam, powder, water spray jet, fine water spray Extinguishing media which must not be used for safety reasons: High pressure waterjet 5.2. Special hazards arising from the substance or mixture In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released. 5.3.
PAGE 4
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours Page 4 of 8 SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational Exposure Limits Valid for Great Britain Ingredient [Regulated substance] ppm mg/m3 Value type Acetic acid 64-19-7 [ACETIC ACID] 10 25 Time Weighted Average (TWA): Short term exposure limit category / Remarks Indicative Regulatory list ECTLV Biological Exposure Indices: None 8.2.
PAGE 5
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours Explosive limits Partition coefficient: n-octanol/water Evaporation rate Vapor density Oxidising properties Page 5 of 8 No data available / Not applicable No data available / Not applicable No data available / Not applicable No data available / Not applicable No data available / Not applicable 9.2. Other information No data available / Not applicable SECTION 10: Stability and reactivity 10.1. Reactivity None if used for intended purpose.
PAGE 6
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours Page 6 of 8 Respiratory or skin sensitization: Hazardous components CAS-No.
PAGE 7
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours Distillates (Petroleum) hydrotreated middle; Gasoil - unspecified 64742-46-7 2-Octyl-2H-isothiazol-3-one 26530-20-1 Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. 12.6. Other adverse effects No data available. SECTION 13: Disposal considerations 13.1.
PAGE 8
MSDS-No.: 462404 V001.3 Pattex Universal Silicone, all colours Page 8 of 8 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H311 Toxic in contact with skin. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H331 Toxic if inhaled.