Safety data sheet

MSDS-No.: 433439
V002.1
Pattex Mould Remover spray
Page 2 of 13
Hazard statement:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
Supplemental information
EUH206 Warning! Do not use together with other products. May release dangerous gases
(chlorine).
Precautionary statement:
P102 Keep out of reach of children.
P101 If medical advice is needed, have product container or label at hand.
P261 Avoid breathing mist.
P280 Wear protective gloves.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P302+P352 IF ON SKIN: Wash with plenty of water.
P271 Use only outdoors or in a well-ventilated area.
2.3. Other hazards
Solvents contained in the product evaporate during processing and their vapors can form explosive/highly inflammable air/vapor
mixtures.
Pregnant women should absolutely avoid inhalation and skin contact.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
General chemical description:
Cleaner
Base substances of preparation:
Sodiumhypochlorite
Inorganic fillers
Declaration of the ingredients according to CLP (EC) No 1272/2008:
Hazardous components
CAS-No.
EC Number
REACH-Reg No.
content
Classification
Sodium hypochlorite
7681-52-9
231-668-3
01-2119488154-34
1- <= 3 %
Aquatic Acute 1
H400
Skin Corr. 1B
H314
Met. Corr. 1
H290
M factor: 10 M factor (Chron Aquat Tox): 10
Sodium carbonate
497-19-8
207-838-8
01-2119485498-19
1- <= 5 %
Eye Irrit. 2
H319
Sodium hydroxide
1310-73-2
215-185-5
01-2119457892-27
< 2 %
Met. Corr. 1
H290
Skin Corr. 1A
H314
Sodium octyl sulphate
142-31-4
205-535-5
01-2119966154-35
< 2 %
Skin Irrit. 2; Dermal
H315
Eye Dam. 1
H318
For full text of the H - statements and other abbreviations see section 16 "Other information".
Substances without classification may have community workplace exposure limits available.