Certifications 2

ManualsBrandsPATTEX ManualsAdhesivesOfen & Kamin Silicone Colour Red 300 ml

Safety Data Sheet according to Regulation (EC) No 1907/2006

Page 1 of 12

Pattex Hightemperature Silicone red

SDS No. : 433426

V001.1

Revision: 07.09.2018

printing date: 22.10.2019

Replaces version from: 12.07.2018

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Pattex Hightemperature Silicone red

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

High temperature sealant

1.3. Details of the supplier of the safety data sheet

Henkel Ltd

Wood Lane End

HP2 4RQ

Hemel Hempstead

Great Britain

Phone:

+44 (1442) 278000

Fax-no.:

+44 (1442) 278071

ua-productsafety.uk@henkel.com

1.4. Emergency telephone number

24 Hours Emergency Tel: +44 0 8701 906777 - For further general health & safety, technical and practical advice on this

product, please call +44 (0) 1606 593933 or write to: Technical Services; Henkel Limited; Road 5; Winsford Industrial Estate;

Winsford; Cheshire; CW7 3QY- Email: technical.services@henkel.co.uk

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.2. Label elements

Label elements (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

Precautionary statement:

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P262 Do not get in eyes, on skin, or on clothing.

P271 Use only outdoors or in a well-ventilated area.

Summary of content (12 pages)

PAGE 1
Safety Data Sheet according to Regulation (EC) No 1907/2006 Page 1 of 12 SDS No. : 433426 V001.1 Pattex Hightemperature Silicone red Revision: 07.09.2018 printing date: 22.10.2019 Replaces version from: 12.07.2018 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Pattex Hightemperature Silicone red 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: High temperature sealant 1.3.
PAGE 2
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Page 2 of 12 2.3. Other hazards Evolves acetic acid during cure. This mixture contains components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB). SECTION 3: Composition/information on ingredients 3.2.
PAGE 3
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red 5.1. Extinguishing media Suitable extinguishing media: carbon dioxide, foam, powder, water spray jet, fine water spray Extinguishing media which must not be used for safety reasons: High pressure waterjet 5.2. Special hazards arising from the substance or mixture In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released. 5.3. Advice for firefighters Wear protective equipment. Wear self-contained breathing apparatus.
PAGE 4
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Page 4 of 12 SECTION 8: Exposure controls/personal protection 8.1.
PAGE 5
SDS No.: 433426 V001.
PAGE 6
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Eye protection: Not needed. SECTION 9: Physical and chemical properties 9.1.
PAGE 7
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Page 7 of 12 SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute oral toxicity: The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances Value CAS-No. type Octamethylcyclotetrasilox LD50 ane 556-67-2 Value > 4.
PAGE 8
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Page 8 of 12 Germ cell mutagenicity: The mixture is classified based on threshold limits referring to the classified substances present in the mixture. Hazardous substances CAS-No.
PAGE 9
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Page 9 of 12 SECTION 12: Ecological information General ecological information: Do not empty into drains, soil or bodies of water. 12.1. Toxicity Toxicity (Fish): The mixture is classified based on calculation method referring to the classified substances present in the mixture. Hazardous substances CAS-No.
PAGE 10
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Hazardous substances CAS-No. Octamethylcyclotetrasiloxane 556-67-2 Page 10 of 12 Result Test type Degradability not readily biodegradable. aerobic 3,7 % Exposure time 29 d Method OECD Guideline 310 (Ready BiodegradabilityCO2 in Sealed Vessels (Headspace Test) 12.3. Bioaccumulative potential Hazardous substances CAS-No. Octamethylcyclotetrasiloxane 556-67-2 Bioconcentratio n factor (BCF) 12.
PAGE 11
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red SECTION 14: Transport information 14.1. UN number Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.2. UN proper shipping name Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.3. Transport hazard class(es) Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.4. Packing group Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.5.
PAGE 12
SDS No.: 433426 V001.1 Pattex Hightemperature Silicone red Page 12 of 12 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H226 Flammable liquid and vapor. H361f Suspected of damaging fertility. H413 May cause long lasting harmful effects to aquatic life.