Safety data sheet

MSDS-No.: 433400
V001.0
Pattex Haus & Bau Silicon - alle Farben
Page 3 of 15
Skin contact:
Rinse with running water and soap. Skin care. Remove contaminated clothes immediately.
Eye contact:
Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes. If pains remain (intensive smarting,
sensitivity to light, visual disturbance) continue flushing and contact/seek doctor or hospital.
Ingestion:
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
4.2. Most important symptoms and effects, both acute and delayed
Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
See section: Description of first aid measures
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
5.3. Advice for firefighters
Wear protective equipment.
Wear self-contained breathing apparatus.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective equipment.
Ensure adequate ventilation.
Avoid contact with skin and eyes.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove mechanically.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Avoid skin and eye contact.
Ensure that workrooms are adequately ventilated.
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.