Manualshelf

Certifications 2

ManualsBrandsPATTEX ManualsAdhesivesClassic Contact adhesive 125 g
12345678910
SDS No.: 390436 V005.0
Pattex Kraftkleber Classic
Page 4 of 21
SECTION 4: First aid measures
4.1. Description of first aid measures
General information:
In case of adverse health effects seek medical advice.
Inhalation:
Move to fresh air, consult doctor if complaint persists.
Skin contact:
Rinse with running water and soap. Skin care. Remove contaminated clothes immediately.
Eye contact:
Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes. If pains remain (intensive smarting,
sensitivity to light, visual disturbance) continue flushing and contact/seek doctor or hospital.
Ingestion:
Rinse mouth, do not induce vomiting, consult a doctor.
4.2. Most important symptoms and effects, both acute and delayed
Causes serious eye irritation.
SKIN: Redness, inflammation.
Vapors may cause drowsiness and dizziness.
4.3. Indication of any immediate medical attention and special treatment needed
See section: Description of first aid measures
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
5.3. Advice for firefighters
Wear self-contained breathing apparatus.
Wear protective equipment.
Additional information:
Cool endangered containers with water spray jet.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective equipment.
Danger of slipping on spilled product.
Ensure adequate ventilation.
Avoid contact with skin and eyes.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove with liquid-absorbing material (sand, peat, sawdust).
Dispose of contaminated material as waste according to Section 13.