Certifications 2
SDS No.: 390433 V004.0
Pattex Gel Compact
Page 5 of 26
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove with liquid-absorbing material (sand, peat, sawdust).
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Ventilate working rooms thoroughly. Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do
not smoke, do not weld. Do not empty waste into waste water drains.
During processing and drying after adhesion, ventilate well. Avoid all sources of fire such as stoves and ovens. Switch off all
electrical devices such as parabolic heaters, hot plates, storage heaters etc. in good time for them to have cooled down before
commencing work. Avoid all sparks, including those occurring at electrical switches and devices.
Avoid skin and eye contact.
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
7.2. Conditions for safe storage, including any incompatibilities
Keep only in original container.
Temperatures between + 5 °C and + 30 °C
Close the container carefully after use and store it at a good ventilated place.
Store protected from heat influence.
Avoid strictly temperatures below + 5 °C and above + 50 °C.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Contact adhesive