Certifications 2

SDS No.: 528149 V002.0
Pattex Repair 100% universal adhesive
Page 3 of 16
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.
5.3. Advice for firefighters
Wear self-contained breathing apparatus.
Wear protective equipment.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective equipment.
Danger of slipping on spilled product.
Ensure adequate ventilation.
Avoid contact with skin and eyes.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove with liquid-absorbing material (sand, peat, sawdust).
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Ensure that workrooms are adequately ventilated.
Avoid skin and eye contact.
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
7.2. Conditions for safe storage, including any incompatibilities
Temperatures between + 5 °C and + 35 °C
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Reaction adhesives