Assembly Instructions

Note: There are many applications for the Patterson
Portable Base 34” fan. Use care when selecting loca-
tions for the fan. Do not place the fan on a sloped
surface. Do not use if the nger guards are missing
or damaged or not tted properly. Do not use if the
cord or connector has exposed wires or is damaged
in any way.
1. If you ordered the 6ALG2, fan head and the
6ALG9, portable base together on the same pu
chase order they will be shipped assembled
together from the factory.
2. If you ordered these separately begin mounting
the fan head to the probable base by rst
securing the separate PB telescoping upright
arms to the fan head stud bolt on either side of
the fan housing leaving them loose for free
swinging.
3. After attaching the upright arms to the fan head
(loosely) using a fork lift to pickup the fan head
maneuver the fan head directly over the
portable base and slowly lower until the upright
telescoping arms slip into the xed uprights of the
portable base.
4. Inserted arm should measure 33-34” total height
from oor keeping fan level between the two
uprights some tapping with block of wood and
hammer may be necessary.
5. Tighten nuts on stud bolts connecting the upright
arms to the fan head housing.
Note: Due to continual product improvement,
items are subject to change without notice.
Patterson Fan Company, Inc
Blythewood, SC 29016
www.pattersonfan.com
800.768.3985
PB Portable Base Mount Assembly Instructions 34” Fan Only