Assembly Instructions

Note: There are many applications for the
Patterson Portable Stroller Fan. Use care
when selecting locations for the fan. Do not
place the fan on a sloped surface. Do not
use if the nger guards are missing or are
damaged or not tting properly. Do not use
if the cord or connector has exposed wires
or is damaged in any way.
1. Place the portable base on a at
surface.
2. Secure the “U” shaped yoke to the
portable base by inserting the 5/8” bolt
through the center hole in the yoke
and through the hole in the pedestal
base arm. Place the 5/8” nut on the
5/8” bolt and tighten securely.
3. Carefully mount the factory assembled
fan with mounting studs through the
holes in the uprights of the “U” shaped
yoke with the motor capacitor is in up
position. Secure the fan to the yoke
with the factory supplied nuts.
Note: Due to continual product improvement,
items are subject to change without notice.
Patterson Fan Company, Inc
Blythewood, SC 29016
www.pattersonfan.com
800.768.3985
PS Portable Stroller Mount Assembly Instructions