Patterson Fan Manual Operating, Installation & Parts Manual (OIPM) Patterson Fan Company, Inc Blythewood, SC 29016 www.pattersonfan.com 800.768.
Contents Page Assembly Instructions 3- 10 Maintenance Instructions 12-14 Trouble Shooting 15 Patterson Fan Company, Inc Blythewood, SC 29016 www.pattersonfan.com 800.768.
YM Yoke Mount Assembly Instructions Note: There are many acceptable methods for hanging a Patterson Yoke Mount fan. The most important things to remember are that the yoke must be securely connected to a solid structure and that all materials used to hang the yoke and fan must be rated for this type of rigging and workload. Below is what we consider to be the simplest method of fan suspension. Feel free to improvise, but please use caution and good judgment. 1.
PS Portable Stroller Mount Assembly Instructions Note: There are many applications for the Patterson Portable Stroller Fan. Use care when selecting locations for the fan. Do not place the fan on a sloped surface. Do not use if the finger guards are missing or are damaged or not fitting properly. Do not use if the cord or connector has exposed wires or is damaged in any way. 1. Place the portable base on a flat surface. 2.
PB Portable Base Mount Assembly Instructions 34” Fan Only Note: There are many applications for the Patterson Portable Base 34” fan. Use care when selecting locations for the fan. Do not place the fan on a sloped surface. Do not use if the finger guards are missing or damaged or not fitted properly. Do not use if the cord or connector has exposed wires or is damaged in any way. 1. 2. 3. 4. 5.
TC Truck Cooler Assembly Instructions Note: Important things to remember are that the wall mount should be a solid structure able to support the weight of the fan safely and that the fan should not be at a height that will cause employees to bump their heads. Ideally, the fan should be mounted to blow into the back of the truck down the top corner of either side of the trailer. 1. Secure the wall bracket and arm to the solid surface where you will hang the fan.
CW Column Wall Mount Assembly Instructions Note: The most important thing to remember is that if the fan is at a level near people, it should be equipped with OSHA approved Patterson finger guards. Please contact your factory sales representative to order. 1. Secure Part A of the wall bracket to the solid surface from which you will hang the fan. There is a single mounting hole on the short end of the part. Secure part A using a wall anchor, etc. (Wall anchor not included.) Place a level on the part.
CW Column Wall Mount Assembly Instructions 34” Only Note: The 6ALG2 fan head is equipped with OSHA compliant finger guards. Mount the fan at desired height making sure the fan is not in the headway of personnel preferably out of reach. These fans are powerful and should not be mounted too close to personnel at work stations. 1. See yoke mount instruction for yoke to fan assembly. 2. Assemble the column wall bracket as follows.
HV Ceiling Suspended Assembly Instructions 90° X 2X 30° 1. Facing outlet of fan, drill 2- 5/16” diameter holes (1/2” for 34” fan) one at 10 and one at 2:00 position in front flange. Facing the inlet side of 2. fan, drill 1- 5/16” diameter hole (1/2” for 24” fans) at the 6:00 position in rear flange. Holes should be drilled just behind the bead of the fan housing. Attach two eyebolts to holes in top front of fan. Attach third eyebolt to back rear hole in fan. 3.
Yoke Yoke Mount Assembly Instructions 34” Only Note: There are many acceptable methods for hanging a Patterson Yoke Mount 34 fan. The most important things to remember are that the yoke must be securely connected to a solid structure and that all materials use to hang the yoke and fan must be rated for this type of rigging and workload. Below is what we consider to be the simplest method of fan suspension. Feel free to improvise, but please use caution and good judgment. 1.
End of Assembly Instructions
Please read carefully before assemble, install, operate or maintain any Patterson Fan Product. Protect yourself and others by observing all safety information. Failure to comply with assmebly instructions, national electric codes and OSHA codes, could result in personal injury and/or property damage. Retain instructions for future reference.
Caution Please read carefully before assemble, install, operate or maintain any Patterson Fan Product. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage. Retain instructions for future reference. Disconnect power source before installing or servicing. Failure to disconnect power source can result in fire, shock or serious injury. 1. 2.
Maintenance & Operating Instructions All Patterson Fans are designed to be virtually maintenance free, but routine cleaning and inspection should be performed on a regular basis. Clean the fan of all dust, dirt and grease. Regular cleaning will keep the fan operating safely at optimal performance levels.
Trouble Shooting Instructions Warning: Electrical shock hazard, serious injury or death may occur, disconnect from electrical supply before servicing these products. Fan system: The head consist of four major parts: Housing, Guards, Motor and Blade. See trouble shooting array. PROBLEM CHECK SOLUTION Fan won’t run and makes no sound. Power cord, extension cord, circuit breaker. Connections in motor junction box. Connections on motor capacitor. Reconnect power, extension cord or reset breaker.
