Installation Instructions

TROUBLESHOOTING
1) The light does not come on at all:
a) Make sure the circuit breaker a on and the adaptor is plugging in.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a) Make sure the tape light and the controller was connected followed the arrows direction.
If unable to fix any of the above issues, please consult a certified electrician.
FIVE YEAR WARRANTY:
If, during normal use, this PATRIOT LIGHTING® light breaks or fails due to a defect in material and workmanship within FIVE
(5) year from the date of original purchase, simply bring this light with your original sales receipt back to your nearest MENARDS®
retail store. At its discretion, PATRIOT LIGHTING® agrees to have the product or any defective part(s) repaired or replaced with
the same or similar PATRIOT LIGHTING® product free of charge, within the stated warranty period, when returned by the original
purchaser with original sales receipt.This warranty; (1) excludes expendable parts including but not limited to light; (2) does not cover
damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/property or costs.
This warranty does give you specific legal rights and you may have other rights, which vary from state to state.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-855-508-3883 Monday –
Friday 8:00 a.m. – 5:00 p.m. CST
• Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package
contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate
the product. Contact customer service for replacement parts.
P
INSTALLATION
REPARATION
Cleaning the installation surface.
Sticking to the installation surface.
Product Instructions
Plugging into the socket.
1.Download fro
rSmart Life
Android
One press the button to power ON/OFF the lights
with the lights powered on. Press and hold the button for
about 6 seconds to enter the configuration mode.
Tips: The red lights will flash during the pairing. After 15-20
seconds. the lights will turn solid red if pairing of the application
and the lights was not successful.
Make sure your WiFi network is working before setup the lights
Simplified steps to install the app on your smart device and pair it with Amazon
Alexa. the Google Assistant.using the Smart Life app in the Apple Store/Google Play
Store. Compatible with any smartphone or tablet. including any Android and Apple devices.
Sticking to the installation surface.
1.Make sure quick mode configuration is initiated: the smart LED Strip Lights blink red rapidly.
if it continues to glow solid red or another color. press and hold the button on the Wi-Fi controller
for 6 seconds until the LEDs flash rapidly red.
2.Tap the icon “+” on the top right corner of “Smart Life”, Choose “Lighting” and then choose the
“Lighting (WIFI)”.
3.Follow the in-app instructions to connect the smart LED Strip Lights to your Wi-Fi network.
Only 2.4Ghz WIFI network is supported. Please make sure you choose the right WIFI network(SSID)
and enter the right password.
5.Now you can control the smart LED Strip Lights through
6.Once the configuration is completed successfully, the LE
One press the button to power ON/OFF the lights
with the lights powered on. Press and hold the button for
about 6 seconds to enter the configuration mode.
(Add manually)
The red lights will flash during the pairing. After 15-20
seconds. the lights will turn solid red if pairing of the application
and the lights was not successful.
Make sure your WiFi network is working before setup the lights
device and pair it with Amazon
Assistant.using the Smart Life app in the Apple Store/Google Play
t. including any Android and Apple devices.
4. After connecting. the application will offer to establish a connection. click “Done”
Cleaning the installation surface.
Sticking to the installation
Product Instructions
Lig h t（5m / 10m )
Dat a Cab le（0.2 m )
Co nt r o l ler
Pow er Cab le（2m )
Ad ap t er
Plugging into the socket.
1.Download fro
rSmart Life
User M anu al
Sm ar t St rip Lig ht
ad the manual thoroughly before using the product.
One press the button to power ON/OFF the lights
ALLATION
with the lights powered on. Press and hold the button for
about 6 seconds to enter the configuration mode
Thank you for choosing this product. We use high-quality LED strips featuring
a completely new interactive mode. combined with a natural light mixing algorithm
and 16 million colors to decorate your home.
Tips: The red lights will flash during the pairing.
seconds. the lights will turn solid red if pairing of the application
and the lights was not successful.
Make sure your WiFi network is working before setup the lights
Be sure connecting the cord between lights and controller at the right direction.
Simplified steps to install the app on your smart device and pair it with Amazon
Alexa. the Google Assistant.using the Smart Life app in the Apple Store/Google Play
Store. Compatible with any smartphone or tablet. including any Android and Apple devices.
1
2
3 Plugging into the socket.
4
Put plants under the light of
grow tape and start growing
Clean the surface and make it dry.
Tear off the adhesive and stick to the surface.