Installation Instructions

5
To clean, turn off power and wipe fixture with a damp, non-abrasive cloth.
WARNING: Failure to disconnect power supply prior to troubleshooting any wiring issues may result in serious injury.
Problem: Light does not come on.
Solutions:
1. Check power (circuit box and wall switch) to fixture.
2. Verify that bulb is installed correctly.
3. Check to be sure wires are connected properly with wire connectors.
4. Replace defective bulb with same type of bulb.
TROUBLESHOOTING
CARE AND MAINTENANCE
ASSEMBLY INSTRUCTIONS (continued)
8.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-527-1292
Monday – Friday 8:30 a.m. – 5:00 p.m. CST
Bulb
PARTS REPLACEMENT
For parts and information, please refer to "Package Contents" and “Hardware Contents” on page 1.
Customer Service: 1-800-527-1292
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING
®
lighting xture breaks or
fails due to a defect in material and workmanship within ve (5) years from the date of original
purchase, simply bring this lighting xture with the original sales receipt back to your nearest
MENARDS
®
retail store. At its discretion, PATRIOT LIGHTING
®
agrees to have the product or any defective
part(s) repaired or replaced with the same or similar PATRIOT LIGHTING
®
product or part free of charge,
within the stated warranty period, when returned by the original purchaser with original sales receipt.
This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does not cover
damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specic legal rights and you may have other
rights, which vary from state to state.
Remove socket ring (EE) from the socket on
fixture (A). Attach shade (B) to the socket using
socket ring (EE).
Install one medium base 60-watt max. A19
incandescent bulb or 13 watt max.
SBCFL/SBLED bulb (bulb sold separately).
WARNING: When replacing bulb, please allow
bulb and shade to cool down before touching
them.
Restore power and test fixture.
B
A
EE
Socket