Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
Installation Steps
WS38366
Fixture
End Cap
051207
Ceiling Box
Wire Nut
Mounting Screw
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Fixture wire
Hex Nut
Washer
Nipple
1. Attach the nipple to the mounting strap, and then secure with a washer and a
hex nut.
2. Attach the mounting strap to the ceiling box by using two mounting screws.
3. Make wire connections with wire nuts:
---The black wire from light to the black wire from power source.
---The white wire from light to the white wire from power source.
---Attach the fixture grounding wire to the mounting strap with the green
grounding screw. Then connect it to the house grounding wire with the
wire nut.
Carefully tuck wires back into the ceiling box.
4. Attach the fixture to the mounting strap by inserting the nipple, and then secure
with the end cap.
5. Install bulb. ( Please do not exceed the maximum capacity that is
recommended on the package.)
6. Turn on the power at the fuse or circuit box.