Installation Instructions

ASSEMBLY INSTRUCTIONS

5.)

Fasten fixture body (A) to the ceiling using four screws

(not included).

6.) Where there is a wood joist, use a wood screw to mount the

fixture body (A). Where there is no joist, wall anchors must be

used to mount the fixture body (A) securely to the ceiling board.

NOTE: When mounted, the mounting hardware must secure the

fixture solidly to the ceiling. Wood screws must penetrate joists or

wall anchors must be placed through the ceiling board.

7.) To install diffuser (B). Starting at one end of fixture body (A),

insert diffuser slot onto edge of fixture body (A). Continue this

action down length of diffuser (B) until fully installed onto

fixture body (A). Re-attach end caps (C) with 2 screws.

Place screw covers (DD) on end cap screws.

Restore power at fuse or circuit breaker.

Joist

No-Joist