Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting4300 Lumens 2' x 2' LED Flat Panel Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 348-0097

348-0099

LED FLAT PANEL LIGHT

Model Number: V1841

V1843

Page 1 of 4

HARDWARE CONTENTS Note: Hardware not shown actual size.

PACKAGE CONTENTS

Template

Anchor

Dry Wall Screw

Small Wire Connector

AA DD

Big Wire Connector

Summary of content (4 pages)

PAGE 1
Sku Number: 348-0097 348-0099 LED FLAT PANEL LIGHT Model Number: V1841 V1843 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A C B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) Installation Steps Turn off the power at fuse or circuit box. 1 CC 1. Attach the template (CC) to the outlet box. 2 CC 2. Mark the position of the four holes on the ceiling where the anchors will be placed. Remove the template (CC) and drill four holes on the target. 3 BB --- Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
PAGE 4
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326. Spare Parts List: AA BB Dry Wall Screw X4 Anchor X4 Assembly Kit 5907MM (1 SET) For 348-0097 For 348-0098 For 348-0099 DD EE Big Wire Connector X3 Small Wire Connector X2 CARE AND MAINTENANCE Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.