Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting4800 Lumens 49" LED Wrap Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 348-0100

LED LINEAR PUFF LIGHT

Model Number: V1813

Page 1 of 4

HARDWARE CONTENTS Note: Hardware not shown actual size.

Anchor

Dry Wall Screw

PACKAGE CONTENTS

Wire Connector

Mounting Screw

Summary of content (4 pages)

PAGE 1
Sku Number: 348-0100 LED LINEAR PUFF LIGHT Model Number: V1813 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS C A B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 5 3a Key Hole Slot A Key Hole Slot 3b BB AA AA 3. Mark the position of the four center holes of key hole slots on the ceiling where the anchors will be placed (See Fig.3a). Remove the housing (A) from the outlet box, and drill four holes on the target. Insert the anchors (BB) through the holes of the ceiling, and then insert the dry wall screws (AA) in anchors in part way (See Fig.3b). 5.
PAGE 4
CARE AND MAINTENANCE Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. This LED light fixture is made from quality materials that will last many years with minimum care. You may want to periodically clean the fixture with a soft cloth. To maintain the best appearance of the fixture, do not use cleaners with chemicals, solvents or harsh abrasives.