Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting800 Lumens 22 x 1 LED Strip Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 348-0093

348-0094

LED STRIP LIGHT

Model Number: V1728

V1727

Page 1 of 4

HARDWARE CONTENTS Note: Hardware not shown actual size.

Anchor

Dry Wall Screw

PACKAGE CONTENTS

U Bracket

Link Cord

Power Cord

End Cover

Summary of content (4 pages)

PAGE 1
Sku Number: 348-0093 348-0094 LED STRIP LIGHT Model Number: V1728 V1727 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 3. Attach the fixture to the U bracket (AA) by sliding one side of the fixture into U bracket (AA) first, and then press and push the other side of the fixture into the U bracket (AA). 3 AA A 4. Plug the connector of the power cord(EE) into light fixture(A) and plug the power(EE) into outlet. Note: This power cord has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
PAGE 4
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326 Spare Parts List: AA DD Link Cord X1 U Bracket X2 BB CC Dry Wall Screw X2 EE Anchor X2 FF Assembly Kit 5732MM (1 SET) Power Cord X1 End Cover X1 CARE AND MAINTENANCE Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.