Installation Instructions

Page 3 of 4
ASSEMBLY INSTRUCTIONS (continued)
3
3. Attach the fixture to the U bracket (AA) by sliding one
side of the fixture into U bracket (AA) first, and then
press and push the other side of the fixture into the U
bracket (AA).
AA
A
A
EE
FF
DD
5
Outlet
4. Plug the connector of the power cord(EE) into light
fixture(A) and plug the power(EE) into outlet.
Note: This power cord has a polarized plug (one
blade is wider than the other) as a feature to reduce
the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
Linking multiple fixtures:
The LED strip light fixture can be connected together in series without any connector or using linking cord included
with this product. Maximum link up to 20pcs of 23" strip lights (#348-0093), or link up to 10pcs of 46" strip lights
(#348-0094). Only the first light fixture needs to be plugged into an electrical outlet or direct wired to an electrical box.
● Provide power to the fixtures only after all linking connections have been made.
● Connect each additional fixture without any connector or using the linking cord (DD). Remove the end cover (FF) and
connect each other directly or insert linking cord (DD) into the receptacle in the end of each fixture body. When using
the linking cord (DD), the maximum distance between two light fixtures is 12" using the linking cord (DD) provided.