Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting4044 Lumens 45 x 4 LED Vapor Tight Light

Sku Number: 348-0096

LED VAPOR TIGHT LIGHT

Model Number: V1707

Page 1 of 4

HARDWARE CONTENTS Note: Hardware not shown actual size.

Anchor

Dry Wall Screw

U Bracket

Wire Nut

S Hook

Plastic Plug

Cord Grip

PACKAGE CONTENTS

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Summary of content (4 pages)

PAGE 1
Sku Number: 348-0096 LED VAPOR TIGHT LIGHT Model Number: V1707 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS P B C A HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 3. Unscrew the cord grip (GG) and install it on the end 3 of the housing (B). Loosen the cord grip (GG) on one end of the housing, feed the cord (not included) into the housing through the cord grip (GG), then tighten the cord grip (GG) to secure the cord. GG Cord B 4. Make wire connections using wire nuts as follow: 4 --- Connect the hot wire (usually black insulation) from the driver to the black wire from the cord.
PAGE 4
ASSEMBLY INSTRUCTIONS (continued) B. Suspended Installation Steps 10 10. Install the S hooks (EE) on the back of the housing, connect the chains (not included) to the metal hooks and S hooks (EE). Connect the wires from the cord grip (GG) to the main power cord. Turn off the power at fuse or circuit box. 9. Complete the ﬁxture installation 9 according to the Ceiling Installation section Steps 1-5. Mark two spots on the ceiling 35" apart for the mounting metal hook (not included).