Installation Instructions
Page 6 of 7
ASSEMBLY INSTRUCTIONS (continued)
Using linking cord to connect two or more LED strip lighting fixtures:
Each additional fixture (not included) should be mounted in the same way as the previously installed fixture except
making wire connections. Once installed, attach the linking cord (12 inches) (CC) into the input receptacles between the
previously installed fixture and the additional fixture. Make sure the distance between LED strip lighting fixtures does
not exceed the linking cord length.
Previously Installed Fixture
Additional Fixture
B. Using linking cord:
CC
TROUBLESHOOTING
CARE AND MAINTENANCE
Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
This LED light fixture is made from quality materials that will last many years with minimum care. You may want to
periodically clean the fixture with a soft cloth. To maintain the best appearance of the fixture, do not use cleaners with
chemicals, solvents or harsh abrasives. Do not use liquid cleaner on the LEDs, LED drive, or wiring inside the light
fixture.
POSSIBLE CAUSE CORRECTIVE ACTION
The fixture doesn't light up
The fuse blown or circuit
breaker tips when the light
is turn on.
The power is off.
Check to ensure the power
supply is on
Check to ensure the circuit
breaker is in the on position
Check to ensure proper wire
connections are made. Contact a
qualified electrician.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the power
wire is grounding out.
Contact a qualified electrician.
Check to ensure proper wire
connections are made. Contact a
qualified electrician.
PROBLEM
If unable to fix any of the above issues, please consult a certified electrician.
Spare Parts List:
AA
BB
DD
CC
Anchor
X2
Dry Wall Screw
X2
Linking Cord
7121LC
Plastic Connector
7120PC
Assembly Kit
5403MM (1 SET)
B
C
Diffuser
9743PL FOR 348-0101
9744PL FOR 348-0102
Plastic Plug
5413PA
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326