Installation Instructions

Contents of Spare Parts:
Assembly Kit
(1 SET)
(4824MM)
5-YEAR LIMITED WARRANTY:
This Patriot Lighting fixture carries a limited warranty against defects in material or workmanship. If the Patriot Lighting
product fails at any time within five (5) years after the original date of sale due to defects in material or workmanship,
return the product to Menards with the original sales receipt. At its discretion, Patriot Lighting will replace the defective
fixture with the same or similar fixture or issue a refund. This warranty and any implied warranty (including but not limited
to any implied warranty of merchantability or fitness for a particular purpose) does not cover glass globes, light bulbs and
other expendable items. This warranty excludes coverage of finish or color against tarnishing, flaking, and discoloration.
If the original purchaser ceases to own the Patriot Lighting product this warranty and any implied warranty will be void.
This warranty does not cover damage caused by misuse or abuse, including but not limited to improper installation,
improper usage, accident, negligence, unauthorized repair, unauthorized modifications, or unauthorized maintenance of
the fixture. This warranty does not include reimbursement for inconvenience, installation, setup time, returned shipping
charges or defects, losses, labor, injuries to personal property.
This warranty gives the consumer specific legal rights, and the consumer may have other rights which vary from state to
state. The seller’s employees are not qualified to advise on the use of the fixture. Any oral representations made will
not be binding on seller or its employees.
For questions regarding this product, call toll-free at 1-800-887-6326.
TM
Patriot Lighting
130828
Glass Shade
(1 PC)
(9481EW)
Socket Fixer
(1 PC)
(4824XX)
In case of damaged or missing parts, please call toll-free at 1-800-887-6326
15. Pull the cord ( A ) down slightly until the strain relief touches the hex nut of the canopy, then
fastening cable by screwing headless screw, using supplied flat head screwdriver.
Note: Adjusting the strain relief of the canopy can decrease or increase the length of cord
that is exposed.
16. Place the canopy over the outlet box and onto the screws. Adjust the screws until they protrude
out from the canopy 1/4”. Remove the canopy and secure the position of the screws by tightening
the lock nuts against the mounting strap. Place the canopy back into the screws, and secure it
with two ball nuts.
17. Attach the glass shade onto the glass bracket, secure it with a spacer and socket ring, using
supplied socket fixer.
18. Install a bulb (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
19. Turn on the power at the main fuse or circuit breaker box.